Service area · El Segundo
Laser cutting in El Segundo, CA.
Custom laser cutting and engraving for El Segundo's engineering and tech companies. Acrylic, wood, foam, and more on four CO₂ lasers — about 15 miles from our Downtown LA shop, with next-business-day rush available. We do not cut metal.
Start your El Segundo cutting request.
Send your file and a real person reviews it — usually the same business day.
Beds up to 46 × 58 in · Free file check · A real person reviews every file · Usually priced the same business day
Built for El Segundo engineering and R&D
El Segundo packs engineering and tech companies into a few square miles — engineering teams that need parts fast and precise. We cut enclosures, prototype housings, gaskets, jigs, and scale models for the R&D groups, hardware startups, and manufacturers in the area. A CO₂ laser cuts non-metals; we do not cut or engrave metal.
What we cut for El Segundo customers
Prototyping & R&D
Enclosures, housings, and proof-of-concept parts for hardware teams.
Engineering parts
Gaskets, jigs, templates, and acrylic fixtures cut to spec.
Models & engraving
Scale models plus engraving on acrylic and wood.
Materials we work with
We cut, score, and engrave a wide range of laser-safe materials. We stock 1/8″ acrylic in clear, black, and white, plus wood and mylar — bring your own for anything else, or we can source it.
Acrylic
Cast and extruded acrylic, up to 1/4″ — clean, flame-polished edges.
Acrylic →Plywood
Void-free Baltic birch, up to 1/4″ — clean cuts for models and parts.
Plywood →Wood
Hardwoods and basswood, up to 1/4″ — cut, scored, and engraved.
Wood →Leather
Vegetable-tanned leather — cut and engraved with a sealed edge.
Leather →Fabric
Cotton, felt, denim, and more — cut clean with sealed edges.
Fabric →Paper & cardstock
Paper, cardstock, and board — cut to fine, intricate detail.
Paper & cardstock →Plus custom mylar stencils, foam, EVA foam, cork, rubber, and more — see the full materials list. We do not cut PVC, vinyl, polycarbonate, MDF, ABS, fiberglass, or metal.
Getting your job to us
Most El Segundo customers send a file — but you have three easy ways to get a job to us.
Drop-off
Drive it in to 1319 S. Los Angeles St. in the Fashion District — about 15 miles northeast of El Segundo, by appointment.
Send a file
Skip the drive — send your file online, approve the quote, and pick up or have it shipped when it is ready.
Mail-in
For mailed jobs, use our mail-in address at 1319 S Los Angeles St, Los Angeles, CA 90015.
How the work runs
The shop, the machines, and the turnaround are the same wherever you are coming from.
Four CO₂ lasers
We cut, score, engrave, and mark on four CO₂ lasers — beds up to 46 by 58 inches, the largest publicly accessible in Los Angeles. CO₂ lasers do not cut metal.
Materials
Acrylic, plywood, hardwoods, leather, fabric, paper, foam, cork, and mylar. Bring your own laser-safe stock and we do not mark it up. See the full materials list.
Turnaround & pricing
Standard turnaround is 3 to 5 business days; next-business-day rush is available on most jobs. Every project has a $65 minimum and a clear itemized quote — no setup fees.
Laser cutting across the LA area
Most customers send a file and we ship anywhere — but if you are nearby, here are the areas we serve most.
Laser cutting in Los Angeles
Our main LA hub — services, materials, large-format.
Los Angeles →Laser cutting in Downtown LA
Walk-in close in the Fashion District.
Downtown LA →Laser cutting in Hollywood
Props, set dressing, and signage for production.
Hollywood →Laser cutting in Santa Monica
Prototypes, displays, and branded pieces.
Santa Monica →Laser cutting in Culver City
Studio props, agency builds, and tech prototypes.
Culver City →Laser cutting in West Hollywood
Retail displays, signage, and hospitality pieces.
West Hollywood →Laser cutting in Inglewood
Event signage, displays, and fabrication parts.
Inglewood →Outside the immediate area?
See laser cutting across Southern California, or send your file by mail from anywhere in the US. We also do laser engraving and custom stencils.